CONEXANT HYDERABAD RECRUITING exp+ freshers

Status
Not open for further replies.

jitender_singh

New member
Hi,

Below are the requirements in Conexant .

ATA & IP Phone

Developers (3-7 yrs experience)

Synopsis: Contribute to implementing and delivering VoIP systems using background in embedded systems programming, and prior exposure to communincation (and VoIP) protocols

Education: B.Tech/M.Tech/MCA (EEE, ECE, CSE) (EEE-Electrical & Electronics Engg; ECE-Electronics & Communciations Engg; CSE-Computers Science & Engg)

skills required: RTOS experience (preferably VxWorks); C language (C++ experience is OK)
Call Signaling protocol experience (preferably SIP; H.323/MGCP is OK)
skills desirable: RTP, RTCP, embedded development skills

Candidates should have prior exposure to any SCM tools/environment (CVS/PVCS etc for source code control, and any defect tracking system)


DVT (0-4 yrs experience)

Synopsis: Contribute to system/performance/interop testing of VoIP products

Education: B.Tech/M.Tech/MCA (EEE, ECE, CSE) (EEE-Electrical & Electronics Engg; ECE-Electronics & Communciations Engg; CSE-Computers Science & Engg)

skills required: QA experience of VoIP products (IP phones/PBX's/Gateways/ATA's using any known prototol: SIP/MGCP/H.323)
Ability to use automatic testing equipment and tools; ability to use performance tools (such as Rational PQC: Purify/Quantify/CodeCoverage)
Ability to identify and document test cases for sanity, funcationality (per requirements), peformance, stress and interop
Experience with any defect tracking system

skills desirable: Good knowledge of any scripting tool (Ksh/Perl/Tcl)


Linux-based VoIP Systems

Developers (3-7 yrs experience)

Synopsis: Contribute to implementing and delivering VoIP systems using background in embedded Linux programming, and prior exposure to communincation (and VoIP) protocols

Education: B.Tech/M.Tech/MCA (EEE, ECE, CSE) (EEE-Electrical & Electronics Engg; ECE-Electronics & Communciations Engg; CSE-Computers Science & Engg)

skills required: Linux (preferably embeddded/realtime versions such as BlueCat/RTLinux etc.); C language (C++ experience is OK)
Ability to write components of a Board Support Package in Linux environment (such as Flash filesystem, boot load/firmware upgrade etc.)

skills desirable: RTP, RTCP, embedded development skills

Candidates should have prior exposure to any SCM tools/environment (CVS/PVCS etc for source code control, and any defect tracking system)

DVT (0-4 yrs experience)

Synopsis: Contribute to system/performance/interop testing of VoIP products

Education: B.Tech/M.Tech/MCA (EEE, ECE, CSE) (EEE-Electrical & Electronics Engg; ECE-Electronics & Communciations Engg; CSE-Computers Science & Engg)

skills required: QA experience of VoIP products (IP phones/PBX's/Gateways/ATA's)
Ability to use automatic testing equipment and tools; ability to use performance tools (such as Rational PQC: Purify/Quantify/CodeCoverage)
Ability to identify and document test cases for sanity, funcationality (per requirements), peformance, stress and interop
Experience with any defect tracking system

skills desirable: Good knowledge of any scripting tool (Ksh/Perl/Tcl), QoS Testing knowledge


Nucleus BSP

Developers (3-7 yrs experience)

Synopsis: Contribute to implementing and delivering Board Support Packages and device drivers for Conexant's high-end communication platforms

Education: B.Tech/M.Tech (EEE, ECE, CSE) (EEE-Electrical & Electronics Engg; ECE-Electronics & Communciations Engg; CSE-Computers Science & Engg)

skills required: RTOS (preferably Nucleus)
Ability to write components of a Board Support Package in Nucleus environment (such as Flash filesystem, device drivers for Ethernet/USB etc., boot load/firmware upgrade etc.)


Candidates should have prior exposure to any SCM tools/environment (CVS/PVCS etc for source code control, and any defect tracking system)


DVT (0-4 yrs experience)

Synopsis: Contribute to system/performance testing of BSP's in a Nucleus/Linux environment

Education: B.Tech/M.Tech (EEE, ECE, CSE) (EEE-Electrical & Electronics Engg; ECE-Electronics & Communciations Engg; CSE-Computers Science & Engg)

skills required: QA experience of device drivers, low level firmware
Ability to use automatic testing equipment and tools
Ability to use performance tools (such as Rational PQC: Purify/Quantify/CodeCoverage), and to use network analyzer equipment such as Smartbits etc.
Ability to identify and document test cases for sanity, funcationality (per requirements), peformance, stress and interop
Experience with any defect tracking system

skills desirable: Good knowledge of any scripting tool (Ksh/Perl/Tcl) or C to automate low level testing.

Regards
Jitender
 
Status
Not open for further replies.
Back
Top